Installation of "Socket Rugged 10/100 Ethernet Cards" on the 
mPower and PK 

The original Socket Low-Power Ethernet CF card is no longer 
freely available on the market, but a replacement card is 
available - the Socket Rugged 10/100 Ethernet CF card. However, 
to use this card with KeySoft Version 7.2 or earlier, you must 
first install the necessary driver software, which HumanWare has 
released as a separate software package.

The package contains two files:

1. Install.exe, which allows new driver files for various cards 
to be installed.

2. Rugged.exe, which contains the drivers for this particular 
card.

The first part will be incorporated in KeySoft at the earliest 
opportunity, but until then you will need to run this file before 
installing drivers for the very first time.  You only need to run 
this file once - so if you install further sets of drivers for 
different cards, you don't have to run install.exe again.  Don't 
worry if you accidentally run it again, it won't cause any 
problems.

The second part contains the driver files for this specific card.  
When you run rugged.exe, the files are copied to your Flash Disk 
so you won't lose them if you perform a 4-5-6 or service reset, 
or let the unit run out of battery power.  After these files are 
copied to the Flash Disk, they will be used after each reset - so 
you will need to reset after the installation for the card to 
start working.

Important: Do not insert the card until instructed to do so.  The 
unit must be always be switched off before the card is inserted.


Installation Instructions:

1. Download the two files, install.exe and rugged.exe, from 
http://www.humanware.com/Resources/drivers.asp.  

There are separate versions of these files for the  mPower and 
PK.  Ensure you have the correct files for your machine.  If 
downloading on the BrailleNote or VoiceNote, place the files 
in the root directory of the Flash Disk.

If you're downloading the files using a PC, it may be simpler 
to copy the files to removable media, for example an SD or CF 
card or USB Flash drive, and then to put this in your unit 
and run them from that drive.  Where the instructions below
refer to the Flash Disk, instead use the particular drive with
the two files on it.


2. Run installer.exe by proceeding as follows:

a. From the Main Menu, select "Utilities", by pressing U.

b. From the Utilities Menu, select "Application Program", by 
pressing A. KeySoft displays "Run program from which drive? Press 
Enter for Flash Disk".

c. Select the Flash Disk, by pressing Enter. KeySoft displays 
"Directory name? press Enter for /".

d. Select the root directory, by pressing Enter. KeySoft displays 
"Program name?"

e. Review the List of Programs by pressing SPACE repeatedly until 
you get to "Installer". Select Installer, by pressing Enter. 
KeySoft displays "Command line?"

f. Press Enter.

g. Follow the given instructions to start the installation.  You 
will be returned to the Utilities Menu while the installation 
progresses.

h. Once KeySoft tells you that the installation is complete, 
press Enter.


3. In a similar way, run "rugged.exe" as follows:

a. From the Utilities Menu, select "Application Program", by 
pressing A. KeySoft displays "Run program from which drive?"

b. Select the Flash Disk, by pressing Enter. KeySoft displays 
"Directory name? press Enter for /".

c. Select the root, by pressing Enter.

d. Review the List of Programs by pressing SPACE repeatedly until 
you get to "Rugged".

e. Select "Rugged" by pressing Enter. KeySoft displays "Command 
Line?"

f. Press Enter.

g. Follow the given instructions to start the installation.  You 
will be returned to the Utilities Menu while the installation 
progresses.

h. Once KeySoft tells you that the installation is complete, 
press Reset and wait for the Main Menu to be displayed.


4. Now switch off and insert the Socket Rugged 10/100 Ethernet 
Card as follows:

a. Switch the unit off.

b. Insert the card.

c. Switch the unit on. KeySoft displays "Network card ready" 
indicating that the card is now ready to use.


5. The files, installer.exe and rugged.exe are no longer 
required.  You can now delete them from the root directory of 
your Flash Disk.


Remember : ALWAYS ENSURE THE UNIT IS TURNED OFF BEFORE INSERTING 
THE CARD!