Installation of "SD card driver update 1" on the mPower 
-------------------------------------------------------

The Windows CE 4.2 SD card driver has a limitation that doesn't 
let you use all of the available space on SD cards of size 2GB 
or larger. Cards of this size use a slightly non-standard setting 
to allow capacities of greater than 1GB to be created. We've 
introduced support for these cards at the request of our users. 

Devices now supported include:

- Sandisk Ultra II 2GB SD card
- Transcend 4GB SD card

This update applies to all BrailleNote mPower models running 
KeySoft Version 6.2 and upwards.

This package will be incorporated into the next KeySoft release. 
To allow the SD cards to be used on existing units, HumanWare has 
released a driver installation package.

There are two parts to the package:

1. A file called installer.exe that allows new driver files to be 
installed.

2. The packaged drivers (in this case called "SD card driver 
update 1.exe").

The first part of the package is the installer file which only 
needs to be run once - so if you install further sets of drivers for more 
devices, you don't have to run installer.exe again.  Don't worry if you 
accidentally run it again, it won't cause any problems.

The second part contains the driver files for a specific device.  
When you run "SD card driver update 1", the files are copied 
to your Flash Disk so you won't lose them if you perform a 4-5-6 
or service reset, or let the unit run out of battery power.

Detailed instructions for installing the driver files follow.

1. Download the two files, install.exe and SD card driver update 
1.exe, from http://www.humanware.com/Resources/drivers.asp.

If downloading on the BrailleNote or VoiceNote, place the files 
in the root directory of the Flash Disk.

If you're downloading the files using a PC, it may be simpler to 
copy the files to removable media, for example an SD or CF card 
or USB Flash drive, and then to put this in your unit and run 
them from that drive.  Where the instructions below refer to the 
Flash Disk, instead use the particular drive with the two files 
on it.

2. Run installer.exe by proceeding as follows:

a. From the Main Menu, select "Utilities", by pressing U.

b. From the Utilities Menu, select "Application Program", by 
pressing A. KeySoft displays "Run program from which drive? Press 
Enter for Flash Disk".

c. Select the Flash Disk, by pressing Enter. KeySoft displays 
"Directory name? press Enter for /".

d. Select the root directory, by pressing Enter. KeySoft displays 
"Program name?"

e. Review the List of Programs by pressing SPACE repeatedly until 
you get to "Installer". Select Installer, by pressing Enter. 
KeySoft displays "Command line?"

f. Press Enter.

g. Follow the given instructions to start the installation.  You 
will be returned to the Utilities Menu while the installation 
progresses.

h. Once KeySoft tells you that the installation is complete, 
press Enter.

3. In a similar way, run "SD card driver update 1.exe" as 
follows:

a. From the Utilities Menu, select "Application Program", by 
pressing A. KeySoft displays "Run program from which drive?"

b. Select the Flash Disk, by pressing Enter. KeySoft displays 
"Directory name? press Enter for /".

c. Select the root, by pressing Enter.

d. Review the List of Programs by pressing SPACE repeatedly until 
you get to "SD card driver update 1".

e. Select "SD card driver update 1" by pressing Enter. KeySoft 
displays "Command Line?"

f. Press Enter.

g. Follow the given instructions to start the installation.  You 
will be returned to the Utilities Menu while the installation 
progresses.

h. Once KeySoft tells you that the installation is complete, 
press Reset and wait for the Main Menu to be displayed.

4. The files, installer.exe and SD card driver update 1.exe are 
no longer required.  You can now delete them from the root 
directory of your Flash Disk.